Manajemen Pengendalian Mutu Dalam Produksi Agribisnis pada Kelompok Wanita Tani Ayu Tangkas

Authors

  • Ni Putu Sukanteri Universitas Mahasaraswati Denpasar
  • Pande Komang Suparyana Universitas Mataram
  • I Made Suryana Universitas Mahasaraswati Denpasar
  • Diah Yuniti Universitas Mahasaraswati
  • Yenny Verawati Universitas Mahasaraswati

DOI:

https://doi.org/10.31850/jgt.v9i3.626

Keywords:

management, quality, production, agribusiness, ayu tangkas

Abstract

Quality control is needed by the company to improve the quality of the products produced so that they are by the company's standards and by consumer desires. Maintaining the quality of the products made is also necessary to reduce the company's quality assurance costs. The research objective was to analyze the quality control of the products produced and identify the factors that damage the products produced by the Ayu Tangkas Women Farmers Group (WFG). The method used in this research is the Statistical Process Control (SPC) method with analysis using the p-control chart and the Fishbone Diagram. The population in the study were all products produced by WFG Ayu Tangkas in December 2019. The results showed that the quality of snacks made by WFG Ayu Tangkas, as many as 4280 pieces, were under control. This can be seen from the 28 points between the Lower Control Limit (LCL) and Upper Control Limit (UCL). There are only two points that are above the UCL control limit. The factor that causes deterioration in Ayu Tangkas WFG snacks' quality is that the ingredients are not measured with certainty using only the snack maker considerations. Besides, they do not use manufacturing machines, so that the sizes are often not the same because there is no definite SOP for the manufacturing process. There is no promotion so that snacks are made still at a constant volume and the use of firewood in the manufacture so that the heat generated is unstable, causing the snacks to burn and break frequently.

Author Biographies

Ni Putu Sukanteri, Universitas Mahasaraswati Denpasar

Fakultas Pertanian, Universitas Mahasaraswati Denpasar

Pande Komang Suparyana, Universitas Mataram

Fakulltas Pertanian, Universitas Mataram

I Made Suryana, Universitas Mahasaraswati Denpasar

Fakultas Pertanian, Universitas Mahasaraswati Denpasar

Diah Yuniti, Universitas Mahasaraswati

Fakultas Pertanian, Universitas Mahasaraswati Denpasar

Yenny Verawati, Universitas Mahasaraswati

Fakulltas Ekonomi Bisnis, Universitas Mahasaraswati Denpasar

References

Agus, A. (1985). Pengendalian Produk, Edisi 2. BPFE. Yogyakarta.

Amrullah, A., Siburian, P. S., & Zainurossalamia, S. (2016). Pengaruh kualitas produk dan kualitas layanan terhadap keputusan pembelian sepeda motor honda. Kinerja, 13(2), 99–118. https://doi.org/10.29264/JKIN.V13I2.826.

Bose, T. K. (2012). Application of Fishbone Analysis for Evaluating Supply Chain and Business Process- A Case Study On The ST James Hospital. International Journal of Managing Value and Supply Chains, 3(2), 17–24. https://doi.org/10.5121/ijmvsc.2012.3202.

Elmas, H., & Syarif, M. (2017). Pengendalian Kualitas dengan Menggunakan Metode Statistical Quality Control (SQC) untuk Meminimumkan Produk Gagal pada Toko Roti Barokah Bakery. Wiga : Jurnal Penelitian Ilmu Ekonomi, 7(1), 15–22. https://doi.org/10.30741/wiga.v7i1.330.

Hariastuti, N. L. P. (2015). Analisis Pengendalian Mutu Produk Guna Meminimalisasi Produk Cacat. Prosiding Industrial Engineering National Conference (IENACO). http://publikasiilmiah.ums.ac.id/handle/11617/5782.

Indrastuti, I., & Damrah, F. (2018). Penentuan Standard Operating Procedure (SOP) pada Dodol Jewawut. Jurnal Galung Tropika, 7(2), 95-101.

Iriawan, N. (2006). Mengolah data Statistik dengan Mudah Menggunakan Minitab 14. Andi Offset. Yogyakarta.

Marson, E., & Sartor, M. (2019). Quality function deployment (QFD). In Quality Management: Tools, Methods and Standards. https://doi.org/10.1108/978-1-78769-801-720191005.

Saidani, B., & Arifin, S. (2012). Pengaruh Kualitas Produk dan Kualitas Layanan terhadap Kepuasan Konsumen dan Minat Beli Pada Ranch Market. JRMSI - Jurnal Riset Manajemen Sains Indonesia, 3(1), 1–22. http://journal.unj.ac.id/unj/index.php/jrmsi/article/view/766.

Saputra, E. (2018). Analisis Pendapatan Usaha Penggilingan Daging di Kecamatan Seruyan Hilir, Kabupaten Seruyan. Jurnal Galung Tropika, 7(2), 151-161.

Scouse, R. A. (1985). Introduction to Statistical Quality Control. Plastics and Rubber International, 10(1), 30–32. https://www.researchgate.net/publication/294809269_ INTRODUCTION_TO_STATISTICAL_QUALITY_CONTROL.

Wicaksono, P. A., Sari, D. P., Handayani, N. U., & Prastawa, H. (2017). Peningkatan Pengendalian Kualitas Melalui Metode Lean Six Sigma. J@ti Undip : Jurnal Teknik Industri, 12(3), 205. https://doi.org/10.14710/jati.12.3.205-212.

Yuniarto, H. A., Akbari, A. D., & Masruroh, N. A. (2013). Perbaikan pada Fishbone Diagram Sebagai Root Cause Analysis Tool. Jurnal Teknik Industri. https://doi.org/10.25105/jti.v3i3.1565.

Published

04-12-2020

Issue

Section

Articles